• 12223 Answers SOURCE: follow this steps and fix it. God bless you Detach the ends of the pedals from the crank axles. Spread a layer of machine grease over the crank axles, then reattach the ends of the pedals.

2 Remove the bolts connecting the pedals to the swing arms. Detach the pedals from the arms, then spread a layer of machine grease over the axles on the swing arms. On some models, the bolts may also serve as the axles. Reattach the pedals to the arms. 3 Remove the bolts connecting the swing arms to the elliptical's upright.

Detach the swing arms from the upright, then spread a layer of machine grease over the axles on the upright. Reattach the arms to the upright. Link Arms 1 Unplug the power cord. Identify the pivot points where the lower handlebars and the footpad link arms connect at each side of the machine. Use a screwdriver to remove the inside and outside elbow covers at each connection.

This will expose the pivots. 2 Put a box wrench on the lock nut at the inside of one pivot and loosen the bolt with an Allen wrench. Remove the bolt and check the assembly for nylon spacers or a bearing. If no spacer is found, proceed to the next step.

Replace the nylon spacers, reassemble the connection and reattach the elbow covers. Repeat this at the opposite side of the machine. 3 Have an assistant hold a deep socket against the inside face of the pivot hub. Make sure the socket is large enough to allow the bearing to pop out.

Fitness manuals and free pdf instructions. Find the personal fitness user manual you need at ManualsOnline. Spirit Home Gym EL 3 Elliptical. Spirit Owner's Manual.

Insert the point of a flat screwdriver into the outside of the hub until it contacts the bearing. Tap the handle of the screwdriver with a hammer to remove the bearing. Repeat this to remove the bearing on the opposite side. 4 Hold each bearing next to one ear and turn the inner race with your finger. If you hear grinding noises or the bearing is rough, it must be replaced. Lubricate the bearing with lithium grease and a grease gun. Replace the bearing into the hub.

Reattach the lower handlebars and footpad link arms and put the elbow covers on. Pedal Arms 1 Use a flat screwdriver to unseat the tabs that hold the front top cover in place. This will expose the flywheel and pedal arm connection points. Rotate the flywheel by hand and determine whether lubrication will accomplish the repairs. How to crack fractalius free download programs for windows. If the bearings are exposed, use a grease gun with an extension nozzle and lubricate both bearings with lithium grease. If the bearings are damaged or sealed, proceed to the next step. 2 Remove the front and side covers on the main frame.